Brakes/Levers/Pads

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Cane Creek's 200TT Brake Levers are perfect for bullhorn-style bars and other TT base bars. Aluminum levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!

- cold forged aluminum sidepull brake with quick release - Standard pull rear, reverse pull front - Pads included

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Phat Padd was designed specifically for triple wall BMX rims and is a wider pad with more braking surface. Great for 990, U-Brake, and V-Brake systems. Features: - Hardened and plated reinforced steel backbone - Knurl-lock washer system - Available in Threaded and 2024-Aluminum Smooth Post - Rim-friendly compounds Compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Avid XO Trail/Elixir 7/9 Trail and SRAM Guide Ultimate R/RS/RSC/T

- High performance compounds recommended for all-conditions - Steel backing

The Tectonic brake pad is a forged alloy holder that allows the rider to customize the exact positioning of the friction materials. The friction inserts are designed to interlock together and are secured into the holder on all sides. The Pad-Lock washer system has been improved by incorporating the convex pivot adjustment into the backing plate; thus allowing for the reduction in the number of washers needed to achieve all spacing requirements. The Tectonic pads come with a multi friction compound set up, but single or dual compounds can also be configured. Features: - Aluminum Holder - Integrated Pad-Lock Hardware - Secured End Cap - Interchangeable Compounds - Offset Post - Water Grooves - Available in Threaded and Cantilever (Non-Threaded) Specifications: - Weight per pair: 50.8 grams - Overall length: 73.3 mm - Pad contact width: 9.5 mm

With copper plated backing plate and sintered front these Kool-Stop metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Kool-Stop pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers