This is the indexed ratchet needed for converting Campagnolo 11-speed rear derailleurs with a 27-tooth maximum tooth capacity to a 29-tooth maximum tooth capacity to work with 12-29 cassettes.
- EPS specific front derailleur nut and washer
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
The new Super Record 12x2 Speed mechanical front derailleur: lightness, design, fluidity, and effectiveness. The new Super Record 12x2 Speed mechanical front derailleur introduces many new techniques, starting with the leverage systems designed to speed up derailings. Less effort is needed to shift owing to the split front connecting rod, which prevents contact with the travel limit screw. Whilst the shape of the inner cage plate is engineered to guarantee maximum readiness for upshifting, the external monolith body in carbon fiber has been shaped to enhance the efficiency of the chain movement when going uphill and the readiness and fluidity in descent. The aesthetic impact of the component is consistent with the rest of the Super Record groupset due to the use of unidirectional carbon fiber and titanium stop screws. Micro-adjustments to the front derailleur position, which can be activated by the controls, help to prevent any contact with the chain, even in the case of maximum crossover. As regards compatibility, the new Super Record 12x2 Speed front derailleur allows the use of hoods measuring up to 32 mm thanks to the new upper connector rod and the double fixing position of the control cable.
New mechanical Record 12 Speed rear derailleur: precision, lightness, and versatility. Designed to improve performance and function in every aspect, the new Record 12 Speed mechanical rear derailleur has an innovative shape that envelopes the sprockets better thanks to 3D Embrace technology, creating a double effect: allowing the chain to maintain optimum traction at all times, thus increasing the speed, power, and precision of shifting; and ensuring that the derailleur is always kept an optimal distance away from the sprockets. The cage has also been optimized to work with sprockets from 11 to 32 teeth, allowing a single version to be maintained for all available sprocket sets. The upper part of the new Record 12 Speed mechanical rear derailleur gearbox is made of carbon fiber-reinforced technopolymer, contributing to its robustness and lightness, while the stop adjustment screws at the back of the rear derailleur make adjustments very simple.
Chorus 11-speed's shifting precision is comparable to its older siblings Record and Super Record. The design and geometry of the rear derailleur are exactly the same. The only difference lies in the materials used, which made it possible to keep a favorable price without lowering the performance levels. A groupset dedicated to competition like the Chorus 11-speed can't forego showing its true competitive spirit, and the carbon fibre front plate is the proof. - Carbon fiber front plate and cage and alloy fixing bolts - Campagnolo Ultra-Shift parallelogram maximizes stiffness, shifting speed and precision - Special lightweight rubber pulleys reduce friction and noise - Compatible with Potenza and model year 2015 and newer Chorus, Record and Super Record - Not compatible with pre 2015 Campagnolo drivetrains - Pulley rollers on bushings in sintered material - Drivetrain Speeds: 11 - Cage Length: Medium - Chain Wrap Capacity (teeth): 37 teeth - Largest Cog: 32
Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g
The new Super Record 12x2 Speed rear derailleur: pure technology. Functionality combines with the highest quality materials and exceptional weight to generate unparalleled performance. A connector rod has been added to the new Super Record 12x2 Speed rear derailleur, as well as a unidirectional front rocker arm in carbon fiber that further reduces the weight of the component, lends uniformity to the aesthetics, and magnifies the incredible performance of Campagnolo's signature component. The new Super Record 12x2 Speed rear derailleur can be described as a sculpture with an innovative shape that uses 3D Embrace technology to better cradle the smaller sprockets. The technology serves a double purpose: it enables the chain to maintain optimum traction at all times, thus increasing the speed, power, and precision of shifting; it also ensures that the rear derailleur is always at an ideal distance from the sprockets. The rocker arm was optimized to interface with sprockets that have from 11 to 32 teeth, thus requiring only one version for all of the sprocket packs available. The upper body of the new Super Record 12x2 Speed rear derailleur is made of technopolymer plastic reinforced with carbon fiber, which contributes to the robustness and lightness of the component, whilst the titanium stop screw ensures a reduction in weight and matches even better with the technical and aesthetic aspects of the component.
Campagnolo's Super Record EPS Braze-On Front Derailleur delivers electronic precision to your front shifts. Hammer into the big ring and surge forward with a mere touch of a button, under heavy load or out of the saddle it's still as smooth as a dream. An aluminum internal cage plate and external carbon cage is powered by a servo motor to provide the incredibly quick shifting. It's versatile too, working with both standard and compact cranksets and auto-trimming to eliminate chain rub. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 127g
- Turn your bike into a single-speed - Mounts on derailleur hanger - Lightweight alloy - Adjustable chainline
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
This microSHIFT dual pull trekking front derailleur is compatible with 2x8 mountain bike drivetrains, and cranks with up to a 48t large cog. - Durable metal construction - Compatible with Boost and non-Boost chainlines - 16t capacity - Drivetrain Speeds: 8 - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") - Max Ring (teeth): 48
R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.
$22.99 - $30.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
$24.99 - $29.99
XLE front derailleurs deliver seamless compatibility with Shimano mountain systems, allowing you to repair or upgrade at an attractive price.
Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter
The microSHIFT R538 front derailleur is designed for 3 x 8-speed drivetrains, and is compatible with Shimano 8-speed systems.
Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings
When your riding gets adventurous, more range means more versatility. With the ADVENT front derailleur, you can run a gravel-style 46-30T crank paired with an 11-42 cassette, resulting in a ridiculous 585% gear range. Will that work best for traditional touring, gravel, adventure racing, or bikepacking? The answer is yes. - Top Gear Teeth: 44-48T - Capacity: 16T - Band Clamp: 34.9mm (31.8mm w/Shim) - Chain Line: 48.8mm / Boost 51.8mm - Chainstay Angle: 63-68
$27.99 - $36.99
R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body
Compatible with Shimano 10-speed mountain shifters as well as microSHIFT variations, the XCD front derailleur performs well under the pressures of mountain bike racing. - Full aluminum construction - Includes adapter for 31.8mm seat tube - Chainstay angle: 66-69°
Centos front derailleurs are precisely manufactured for responsive, accurate shifting under race conditions. - Compatible with Shimano Tiagra 4700 10-speed road systems - Includes adapter for 31.8 and 28.6mm seat tubes
Centos front derailleurs are precisely manufactured for responsive, accurate shifting under race conditions. - Compatible with Shimano road 11-speed systems
$38.99 - $42.99
R-series rear derailleurs are designed to work with 7, 8, 9, and 10-speed Shimano-compatible road shifters. These R10 aluminum rear derailleurs are lightweight, precision CNC-machined, robust, and can get any bike back on the road. - Lightweight all-aluminum construction - Compatible with Shimano 7, 8, 9, and 10-speed road systems - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Medium cage for double crankset and 34T max cog
$40.99 - $45.99
Centos delivers race-level shifting performance with full-aluminum construction. These derailleurs support all riders engaged in any kind of road riding. - Lightweight full aluminum construction - Short cage is compatible with double cranksets and a 30T max cassette
XLE Rear Derailleur for 10-speed Shimano drivetrains - For MEGA Sprockets w/large cog size 36-42T - Compatible with single, double, or triple cranksets - Total Capacity: 47T
Arsis is the pinnacle of microSHIFT's road component line. Featuring a cold-forged aluminum bracket and carbon outer link, this front derailleur delivers precise shifting under pressure. - Precisely designed cold-forged bracket for smooth, accurate shifts - Stiff lever arm for quick response - Designed for 43.5mm chainline - Chainstay angle: 61-66° - Compatible with Shimano 11-speed road systems
Page 1 of 7 Next page