Tires/Tubes

- Size: 700c x 18 – 23 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 100g (32mm), 101g (48mm & 60mm), 103g (80mm)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 12 1/2 x 2 1/4

Keep wind in your sails and air in your tires with one of MICHELIN's Airstop butyl inner tubes. These hold air pressure thanks to butyl construction, and are puncture-resistant to ensure you ride without fear of glass, wicked goat heads, or other road debris. Stick one in your jersey pocket and get out there!

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- Size: 26 x 1-3/8 - ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width: 37mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

Continental bicycle tubes are made of seamless butyl rubber and are individually tested for top quality.

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

- EVA flat liner material - Resists thorns, glass, and sharp objects - Place inside tire between tube and tire

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Serfas replacement inner tubes are lightweight, durable, and affordable.

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- Size: 26 x 2.4 – 2.75 - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm, 69mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 283g

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Presta Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

- Recreational tire with horizontal grooves for traction - Size: 24 x 1 1/4 - ISO 547

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 507 / 24" BMX - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 24 x 1.9-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 600g

- Easy-rolling on/off-road compound - Knobs spaced for grip in the dirt and grass - Continuous center tread for a smooth ride

- Recreational tire with raised center, slight lateral grooves for traction - Size: 24 x 1 3/8

- Gray tread, sidewalls with raised center and lateral knobs - 24 x 1-1/4 (ISO 547) - 24 x 1-3/8 (ISO 540)

The K40 is a reliable tire for recreational use. Its grooved tread provides traction on pavement. Kenda K40 Street tires are designed for a variety of paved road conditions while providing comfort at a economical price - Fits EA3/E3/650A Rims typically on English 3 Speed bikes

The S-5 Black Steel Tire in K62 Tread is a great tire for any road bike. - K62 tread pattern - Made from quality Kenda rubber - ETRTO: 37-547 - Wire bead

- Low rolling resistence with long tread life - Advanced siping tread design for enhanced wet road traction - Continuous center tread for smooth riding

- Fast rolling with consistent, predictible traction - Directional tread pattern ideal for dry to tacky trail conditions - Angled, siped knobs spaced for enhanced cornering bite

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

- Kenda model K103 - A good, basic repair tire

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 507 - Bead: Wire - PSI: 65

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 559 - Bead: Wire - PSI: 65

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt.

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire - Compound: 70a for 12", 16", 18," and 20" Compound: 60a for 24" - Flat Protection: Flak Jacket for 12", 16", 18", and 20" - 20 x 2.0", PSI 35-65, approximate weight 525g

The Current tire features a directional grippy tread pattern with good shape and tire width. It’s an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. - Grippy tread pattern - Affordable high-pressure tire

- Fast rolling with consistent, predictible traction - Directional tread pattern ideal for dry to tacky trail conditions - Angled, siped knobs spaced for enhanced cornering bite

The Kenda Kwest Hybrid Tire is a road tire designed with a smooth rounded tread with large water dispersion grooves. - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

- Fast rolling, durable compound - Continuous center tread for a smooth ride - Directional siping for enhanced traction on wet pavement

The S-6 Black Steel Tire in K23 Tread is a great tire for any road bike. - K23 tread pattern - Made from quality Kenda rubber - Wire bead

Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Sold as a card of 12

The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

- Deep grooves evacuate water and dirt efficiently

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire

An aggressively styled youth tire for all-condition riding, our Roller tire is the perfect tire for your kids to learn how to shred. - Casing: 22 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 12 x 2.125", PSI Max 40, approximate weight 280g

Sunlite's Cruiser 80 are balloon-like tires with grooved tread, large air volume for shock absorption. - Bead: Wire