Parts & Accessories

Carry your gear behind you tucked out of the wind with XLAB's Carbon Wing Dual Rear Carrier. This versatile aero add-on provides options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages mount on the outside and tubes can go underneath (all accessories sold separately). The possibilities are endless. You also have 3 mounting options that fit most seats so you can place your bottles just where you want them. And, the Carbon Wing is made of stiff, super-light carbon so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps. It can be used with standard 7mm metal-rail saddles or carbon-rail saddles.

Carry your gear tucked out of the wind with XLAB's Super Wing SMP Rear Carrier designed specifically for Selle SMP and Phenom saddles. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles just where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

This reservoir with Thermal Control insulation turns any pack into an all-season 100-ounce hydration system. Features: - The Crux Reservoir delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - 10mm closed cell foam reservoir insulation - Insulated tube and bite valve cover - Attachment points - Large adjustable carry loop

Specialized's Reserve Rack is the aero way to carry water and inflation tools on your bike. The Reserve Rack fastens to your saddle rails and allows you to mount a water bottle cage, mini pump, and two CO2 canister where they'll stay tucked out of the wind.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

The Aerodrink BTA bracket offers secure bolt-on bottle mounting to aero bars and adapts to a variety of extensions. It includes a durable restraining strap for easy bottle installation and removal and an adapter to fasten horizontal BTA hydration systems. - Fits single and dual chamber systems along with horizontal BTA systems (with included adapter) - Attaches to bars with bolt-on adjustable wings that adapt to different aero bar width extensions - Adjusts to 140mm wide - Compatible with Profile Design FC25/FC35 hydration systems, Aero HC bottles, Aqualite bottles, Aerodrink bottles, Aquacell bottles, and standard bottles and cages - Made of Injected Nylon and Glass fiber - Weight: 130g

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.

• KEEP LIQUIDS COOL - Silver exterior reflects heat away keeping liquids 25% cooler • FULL INSULATION - Bottle (sold separately) is completely covered for maximum insulation • INSULATED STRAW COVER - Keep liquids in straw cool for instant refreshment • EASY INSTALLATION - Simple install and removal for bottle cleaning • FOLDING STRAW ABILITY - Fold straw for optimum aerodynamics • PREMIUM MATERIAL - Full 3mm low-friction smooth skin insulating neoprene • Compatibility: Fits TORPEDO SYSTEM 50, 100 & 400 • Material: Neoprene • Weight: Bottle cover: 41 grams, Straw cover: 10 grams • Includes: Bottle cover, Straw cover, Instructions

Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands

- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

Keep your reservoir funk-free with this cleaning brush kit from CamelBak.

The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

- BH-95X adapter provides an extra bottle cage mount on bars, frame or seatpost - Universal band clamp fits any diameter between 22-35mm - Stainless steel construction - Two bottle cage mounting screws included

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates