Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
All the parts needed to mount a Flux Elite headlight to a second bike. - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Unlock all the functions of the Flux light with this two button remote. • Compatible with both the Flux Expert and Elite Headlights. • Lights up while the Flux headlight is on and repeats the Mode button and adds the Highbeam button (see Flux Headlight Manual for details) • Note: The remote is a "slave" unit and can turn a Flux headlight off but does not operate until the headlight has been turned on using the main button on the headlight.
- White light modes include high steady, low steady, fast flash, and slow flash - Red light modes include high steady, low steady, fast flash, and slow flash - Dual functionality — Can be used as front or rear light - Low-battery indicator illuminates when power is less than 25% - Water resistant & lightweight, weighs only 22 grams (per unit) - Front, rear, and clip mounting. - Clip-on system provides a versatile mount solution for straps and packs - Fully USB rechargeable — No batteries to buy or replace Avenue F-50 - Lumen Output: 50 Lumens - Beam Distance: 19 meters - Beam Intensity: 88cd Avenue R-14 - Lumen Output: 14 Lumens - Beam Distance: 19 meters - Beam Intensity: 88cd
Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time
- 60 Lumen LED commuter and safety light - Up to 18 hours run time with supplied AA batteries - 3 modes inlcuding 2 solid and 1 flashing - Multi-fit rubber strap mounting - Water resistant design
- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
CatEye and fizik collaborated to design this custom bracket that fits all fizik saddles with the fizik ICS (Intergrated Clip System) technology. Clip a CatEye Rapid 1, 3, or 5 tail light into the bracket and insert in the back of the saddle for a clean seamless look. Comes with both the long and short bracket to fit all ICS saddles.
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
Previous page Page 2 of 2