Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

Crank Brothers Synthesis E11 I9 Carbon 29-inch Wheelset
$2,400.00
Control and stability for enduro riding. Details - Tuned Front and Rear Carbon Wheel System for enduro riding and racing. - Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads encountered by each wheel during mountain bike riding. - Compliant-tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increases volume and contact patch, and rounds tire profile to enhance turning. - Stiff-tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
Stan's NoTubes Podium SRD 29-inch Rear
$1,085.00
The Podium SRD earned major wins at the B.C. Bike Race and U.S. Marathon National Championships while it was still only in development and stands out as Stan's fastest and lightest racing wheel. Stan's patented BST rim shape has been taken even further by decreasing sidewall height and updating Stan's carbon layup process to shave even more weight where it matters most. Though the 300g Podium SRD rim is Stan's lightest carbon rim, it's every bit as strong as Stan's acclaimed Valor and 15% stiffer laterally, thanks in big part to the evolution of Stan's impact absorbing technology. The new RiACT rim shape and lay up is able to deflect 11% more than the Valor, which translates into fewer pinch flats, added durability, and less rolling resistance. The Podium SRD is laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. Combined with Stan's Neo Ultimate hub with updated Speedsync bearing and axle design and near instantaneous engagement, the Podium SRD is purpose built for racing, and ready to live up to its name. Podium SRD wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Speed and durability: deflects impacts and defies tire pinch flats - Race bred with wins at the B.C. Bike Race and U.S. Marathon National Championships - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires - Register your wheels for 5-year warranty and lifetime crash replacement
Mavic XA Elite Carbon 29-inch Rear
$935.00
The advantages of carbon rims are well-known by now: They are light, they are stiff, and they can be built to be nearly indestructible. But with this new trail-riding wheel, we also focused on ride quality. There is such a thing as too stiff, and the XA Elite was developed over time to find the perfect balance that also includes just enough vertical compliance to smooth out the ride quality and optimize tire performance. It all starts with the layup of the carbon fiber itself. We went through several iterations to arrive at the perfect formula, as deemed by our experienced test riders. The rims have an asymmetric shape and are 30mm wide, perfect for getting the most out of just about any trail riding tire. We use 24 straight-pull spokes to further dial in the spot between lateral stiffness and vertical compliance. The hubs feature our new ID 360 freewheel for durability and fast engagement. They are set up for 6-Bolt discs and compatible with all current axle standards, including Standard and Boost spacing. Lightweight feel (1650g) for fast climbing and agility on the trail - Full-carbon rim delivers quick acceleration and a responsive feel. Better traction and control, plus a reduced risk of punctures - 30mm internal width rims are optimized for larger trail tires. - Hookless rim profile reduces tire burbs and creates stronger rim. More control, more confidence on the trail - Laterally stiff with just enough vertical compliance - Two-cross spoke pattern on the front and rear creates a smooth, comfortable ride quality.
Race Face Next SL Rear Wheel
$824.99
Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto our Vault Hub gives you a stronger, stiffer wheel construction and the Vault’s Super Fast Engagement, long bearing life, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - Low drag labyrinth cassette body seal - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals
Race Face Next R 29-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 29-inch Rear Wheel
$774.99
- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)
Stan's NoTubes Arch CB7 29-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Stan's NoTubes Crest CB7 29-inch Rear
$720.00
Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact-absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires
Roval Traverse Fattie 29 Wheelset
$600.00
Traverse means to ride up, across and down, which is exactly what Roval's Traverse Fattie 29 Wheelset does best. Made with tough Specialized E5 aluminum rims laced with pro-level DT Swiss spokes and nipples, these wheels are a sure fire way to supercharge your trail riding. The 29mm internal rim width supports tire sidewalls better for increased volume, allowing lower pressures, more grip, less air burping, and a ride that feels like your bike gained an extra inch of travel. You can run them with or without tubes and the front hub is compatible with 20mm or 15mm through-axles. The rear hub, replete with DT Swiss 360 internals, comes with end caps for a 135mm quick release or a 12x142mm through axle.
Vuelta MTB Team V 29-inch Wheelset
$600.00
The Vuelta MTB Team V 29-inch Wheelset is a lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for. - Handbuilt - Compatibility: Shimano/SRAM 8/9/10 - Rims: Vuelta 23mm wide sleeved 6066 alloy disc only with stainless steel eyelets - Spokes: Vuelta round double butted stainless steel with alloy nipples - Lacing: Front 3 cross / Rear 3 cross (F28H x R28H) - Hubs: Vuelta 2&1 straight pull 6-bolt disc with Japanese EZO cartridge bearings (F28H x R28H) - Axles: Front and rear quick release or thru axle kit with adaptors included - Extras: Vuelta alloy quick release skewers, axle adaptors, rear thru axle and nylon rim strips - Weight: Front 866g/Rear 935g = Pair 1732g
Mavic XA Pro 29-inch Rear
$550.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain. The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance. Dynamic and lightweight feel for efficient climbing and added agility - ISM 4D machining makes the wheel lighter without compromising durability. - 25mm internal rim width Proven technologies for performance and durability - 24 straight-pull bladed Zicral spokes, front and rear - UST tubeless technology for improved traction and control and reduced risk of punctures - Fore drilling on the rims UST Tubeless Ready design gives you total control on challenging terrain - User-friendly tubeless technology for better traction and control with reduced risk of punctures - Wheels ship with tubeless rim tape installed.
Vuelta MTB AM 29-inch Wheelset
$500.00
The Vuelta MTB AM 29-inch Wheelset is lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for. - Handbuilt - Compatibility: Shimano/SRAM 8/9/10 speed - Rims: Vuelta 27mm wide sleeved 6066 alloy disc only with stainless steel eyelets - Spokes: Vuelta round plain gauge stainless steel with alloy nipples - Lacing: Front 3 cross / Rear 3 cross (F32H x R32H) - Hubs: Vuelta 2&1 mountain 6-bolt disc with Japanese EZO cartridge bearings (F2 x R4) - Axles: Front and rear quick release or thru axle kit with adaptors included - Extras: Vuelta alloy quick release skewers, axle adaptors, rear thru axle and nylon rim strips - Weight: Front 947g/Rear 1082g = Pair 2029g
Vuelta MTB XC 29-inch Wheelset
$500.00
The Vuelta MTB XC 29-inch Wheelset is lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for. - Handbuilt - Compatibility: Shimano/SRAM 8/9/10 speed - Rims: Vuelta 23mm wide sleeved 6066 alloy disc only with stainless steel eyelets -Spokes: Vuelta round plain gauge stainless steel with alloy nipples - Lacing: Front 3 cross / Rear 3 cross (F32H x R32H) - Hubs: Vuelta 2&1 mountain 6-bolt disc with Japanese EZO cartridge bearings (F2 x R4) - Axles: Front and rear quick release or thru axle kit with adaptors included - Extras: Vuelta alloy quick release skewers, axle adaptors, rear thru axle and nylon rim strips - Weight: Front 977g/Rear 1012g = Pair 1889g
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Crest S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Flow S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Major S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Major S1 Wheelset - Use: Plus Tire Adventure and Trail - Internal Rim Width: 38mm - Optimal Tire Size: 3.0 to 3.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (2,030g), 27.5-inch (2,094g), and 29-inch (2,198g).
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Rear
$95.00
Our best value in Quick-release disc wheels.
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Front
$79.00
Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black
Page 1 of 1